| 1.
|
| Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways:
|
| ●
|
| For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
|
|
| ●
|
| For all other trays, load the letterhead paper face-down with the top edge at the back of the tray.
|
|
| CAUTION:
|
To avoid jams, do not load paper that is heavier than 105 g/m2 (28-lb bond).
|
|
| 2.
|
| On the File menu, click Print.
|
|
| 3.
|
| On the Finishing pop-up menu, select the Manual Duplex option.
|
|
| 4.
|
| Click Print. Follow the instructions in the pop-up window that appears on the computer screen before replacing the output stack in tray 1 for printing the second half.
|
|
| 5.
|
| Go to the printer, and remove any blank paper that is in tray 1.
|
|
| 6.
|
| Insert the printed stack face-up with the bottom edge feeding into the printer first in tray 1. You must print the second side from tray 1.
|
|
| 7.
|
| If prompted, press the appropriate control-panel button to continue.
|
|