| 1.
|
| Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways:
|
| ●
|
| For tray 1, load the letterhead paper with the front side down, bottom-edge first.
|
|
| ●
|
| For all other trays, load letterhead paper with front side up, and the top edge at the back of the tray.
|
|
| CAUTION:
|
To avoid jams, do not load paper that is heavier than 105 g/m2 (28 lb bond).
|
|
| 2.
|
| On the File menu in the software program, click Print.
|
|
| 3.
|
| Select the driver, and then click Properties or Preferences.
|
|
| 4.
|
| On the Finishing tab, select Correct order for straight paper path, select Print on both sides (manually), and then open the rear output bin door.
|
|
| 5.
|
|
| 6.
|
| Send the print job to the product. Follow the instructions in the pop-up window that appears before feeding the output stack into tray 1 for printing the second half.
|
|
| 7.
|
| Go to the product. Remove any blank paper that is in tray 1. Insert the printed stack with the printed side up, and the bottom-edge feeding into the product first. You must print the second side from tray 1.
|
|
| 8.
|
| At the control panel, press OK to continue.
|
|