Install a memory DIMM

Install a memory DIMM

HP Laserjet M2727 caution Install a memory DIMM CAUTION:

Handling a DIMM without wearing a grounded, antistatic device might damage the DIMM. Touch any metal part of the product or other grounded metal before touching the DIMM.

1.
Use the power switch to turn off the product, and then unplug all of the cables and cords connected to the product.

HP Laserjet M2727 ol pp02 Install a memory DIMM

2.
Open the DIMM door.

HP Laserjet M2727 ol mm01 Install a memory DIMM

3.
Remove the DIMM from the antistatic bag it came in, grasping the DIMM on the top edge.

HP Laserjet M2727 my im 05 Install a memory DIMM

4.
With the gold contacts facing upward, insert the DIMM in the DIMM seat and press the DIMM body in until the metal retaining pins click.

HP Laserjet M2727 ol mm03 Install a memory DIMM

HP Laserjet M2727 ol mm04 Install a memory DIMM

5.
Close the DIMM door.

HP Laserjet M2727 ol mm02 Install a memory DIMM

6.
Reconnect all cables and cords, and then use the power switch to turn on the product.
7.
Print a configuration page, and then verify that the Memory section shows the new memory amount. See Information pages.
HP Laserjet M2727 Install a memory DIMM