Fax from the automatic document feeder (ADF)

Fax from the automatic document feeder (ADF)

HP Laserjet M2727 note Fax from the automatic document feeder (ADF) NOTE:

The ADF capacity is up to 50 sheets of 80 g/m2 or 20 lb media.

HP Laserjet M2727 caution Fax from the automatic document feeder (ADF) CAUTION:

To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF. Use the flatbed glass to scan these items.

1.
Insert the top-end of the stack of originals into the ADF input tray, with the media stack face-up and the first page to be copied on top of the stack.

If the media is longer than Letter- or A4-sized paper, pull out the ADF input tray extension to support the media.

2.
Slide the stack into the ADF until it does not move any farther.

HP Laserjet M2727 ol sc12 Fax from the automatic document feeder (ADF)

Document loaded appears on the control-panel display.

3.
Adjust the media guides until they are snug against the media.

HP Laserjet M2727 ol sc14 Fax from the automatic document feeder (ADF)

4.
Use the alphanumeric buttons on the control panel to dial the number.

-or-

If the fax number you are calling has been assigned to a one-touch key, press that key.

-or-

If the fax number you are calling has a speed dial or group-dial entry, press Phone Book, use the alphanumeric buttons to specify the speed dial or group-dial entry, and then press OK.

5.
On the control panel, press Start Fax. The product starts the fax job.
HP Laserjet M2727 Fax from the automatic document feeder (ADF)