Set the fax-error-correction mode

Set the fax-error-correction mode

Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the product detects an error during the transmission and the error-correction setting is On, the product can request that the portion of the fax be resent. The factory-set default for error correction is On.

You should turn off error correction only if you are having trouble sending or receiving a fax, and you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.

1.
On the control panel, press Setup.
2.
Use the arrow buttons to select Fax setup, and then press OK.
3.
Use the arrow buttons to select All faxes, and then press OK.
4.
Use the arrow buttons to select Error correction, and then press OK.
5.
Use the arrow buttons to select On or Off, and then press OK to save the selection.
HP Laserjet M2727 Set the fax-error-correction mode