Set autoredial
If the product was unable to send a fax because the receiving fax machine did not answer or was busy, the product attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-error options. Use the procedures in this section to turn these options on or off.
Set the redial-on-busy option
If this option is turned on, the product redials automatically if it receives a busy signal. The factory-set default for the redial-on-busy option is On.
| 1.
|
| On the control panel, press Setup.
|
|
| 2.
|
| Use the arrow buttons to select Fax setup, and then press OK.
|
|
| 3.
|
| Use the arrow buttons to select Fax Send setup, and then press OK.
|
|
| 4.
|
| Use the arrow buttons to select Redial if busy, and then press OK.
|
|
| 5.
|
| Use the arrow buttons to select On or Off, and then press OK.
|
|
Set the redial-on-no-answer option
If this option is turned on, the product redials automatically if the receiving machine does not answer. The factory-set default for the redial-on-no-answer option is Off.
| 1.
|
| On the control panel, press Setup.
|
|
| 2.
|
| Use the arrow buttons to select Fax setup, and then press OK.
|
|
| 3.
|
| Use the arrow buttons to select Fax Send setup, and then press OK.
|
|
| 4.
|
| Use the arrow buttons to select Redial-no answer, and then press OK.
|
|
| 5.
|
| Use the arrow buttons to select On or Off, and then press OK.
|
|
Set the redial-on-communication-error option
If this option is turned on, the product redials automatically if some sort of communication error occurs. The factory-set default for the redial-on-communication-error option is On.
| 1.
|
| On the control panel, press Setup.
|
|
| 2.
|
| Use the arrow buttons to select Fax setup, and then press OK.
|
|
| 3.
|
| Use the arrow buttons to select Fax Send setup, and then press OK.
|
|
| 4.
|
| Use the arrow buttons to select Redial Comm Err., and then press OK.
|
|
| 5.
|
| Use the arrow buttons to select On or Off, and then press OK.
|
|
HP Laserjet M2727 Set autoredial