Set up the computer to receive faxes

Set up the computer to receive faxes


HP Laserjet M2727 note Set up the computer to receive faxes NOTE:

Receiving faxes by using a computer is not supported for Macintosh.

Receiving faxes to a computer is available only if a full software installation was performed during initial product setup.

To receive faxes to your computer, turn on the receive-to-PC setting in the software.

1.
Open HP ToolboxFX.
2.
Select the product.
3.
Click Fax.
4.
Click Fax Tasks.
5.
Under Fax Receive Mode, select Receive faxes to this computer.
Turn off the receive-to-PC setting from the control panel

The receive-to-PC setting can be activated only from one computer. If for any reason that computer is no longer available, you can use the following procedure to turn the receive-to-PC setting off from the control panel.

1.
On the control panel, press Setup.
2.
Use the arrow buttons to select Fax functions, and then press OK.
3.
Use the arrow buttons to select Stop Recv to PC, and then press OK.
HP Laserjet M2727 Set up the computer to receive faxes