Set fax forwarding

Set fax forwarding

You can set your product to forward incoming faxes to another fax number. When the fax arrives at your product, it is stored in the memory. The product then dials the fax number that you have specified and sends the fax. If the product cannot forward a fax because of an error (for example, the number is busy) and repeated redial attempts are unsuccessful, your product prints the fax.

If the product runs out of memory while receiving a fax, it terminates the incoming fax and only forwards the pages and partial pages that have been stored in the memory.

When it is using the fax-forwarding feature, the product (rather than the computer) must be receiving the faxes, and the answer mode must be set to Automatic.

1.
On the control panel, press Setup.
2.
Use the arrow buttons to select Fax setup, and then press OK.
3.
Use the arrow buttons to select Fax Recv. setup, and then press OK.
4.
Use the arrow buttons to select Forward fax, and then press OK.
5.
Use the arrow buttons to select On or Off, and then press OK.
6.
If you turn on the fax-forwarding feature, use the alphanumeric buttons to specify the fax number where the fax is to be sent, and then press OK to save the selection.
HP Laserjet M2727 Set fax forwarding