Load originals

Load originals

Automatic document feeder (ADF)
HP Laserjet M2727 note Load originals NOTE:

The ADF capacity is up to 50 sheets of 80 g/m2 or 20 lb media.

HP Laserjet M2727 caution Load originals CAUTION:

To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF. Use the flatbed glass to scan these items.

1.
Insert the top-end of the stack of originals into the ADF input tray, with the media stack face-up and the first page to be copied on top of the stack.

If the media is longer than letter- or A4-sized paper, pull out the ADF input tray extension to support the media.

2.
Slide the stack into the ADF until it does not move any farther.

HP Laserjet M2727 ol sc12 Load originals

Document loaded appears on the control-panel display.

3.
Adjust the media guides until they are snug against the media.

HP Laserjet M2727 ol sc14 Load originals

Flatbed scanner
HP Laserjet M2727 note Load originals NOTE:

The maximum media size for flatbed scanning is letter. Use the ADF for scanning media larger than letter.

1.
Make sure that the automatic document feeder (ADF) contains no media.
2.
Lift the flatbed scanner cover.
3.
Place the original document face-down on the flatbed scanner with the upper-left corner of the document at the corner indicated by the icon on the scanner.

HP Laserjet M2727 ol sc07 Load originals

4.
Gently close the lid.
HP Laserjet M2727 Load originals