Install the product on a network
In this configuration, the product is connected directly to the network and can be configured to allow all computers on the network to print directly to the product.
| NOTE:
|
This mode is the recommended network configuration for the product.
|
| 1.
|
| Before turning on the product, connect the product directly to the network by inserting a network cable into the product network port.
|
|
| 2.
|
| Turn on the product, wait 2 minutes, and then use the control panel to print a configuration page. .
|
|
| NOTE:
|
Make sure that an IP address is listed on the configuration page before proceeding to the next step. If an IP address is not present, reprint the configuration page.
|
|
| 3.
|
| Insert the product CD into the computer. If the software installer does not start, navigate to the setup.exe file on the CD and double-click the file.
|
|
| 4.
|
| Follow the installer instructions.
|
|
| NOTE:
|
When the installer prompts for a network address, provide the IP address listed on the configuration page that you printed before starting the installer program, or search for the product on the network.
|
|
| 5.
|
| Allow the installation process to complete, and then restart the computer.
|
|
HP Laserjet M2727 Install the product on a network