| 1.
|
| On the control panel, press Setup.
|
|
| 2.
|
| Use the arrow buttons to select Network config, and then press OK.
|
|
| 3.
|
| Use the arrow buttons to select TCP/IP config, and then press OK.
|
|
| 4.
|
| Use the arrow buttons to select Manual, and then press OK.
|
|
| 5.
|
| Use the alphanumeric buttons to type the IP address, and then press OK.
|
|
| 6.
|
| If the IP address is incorrect, use the arrow buttons to select No, and then press OK. Repeat step 5 with the correct IP address, and then repeat step 5 for the subnet mask and default gateway settings.
|
|