Automatic configuration

Automatic configuration

1.
On the control panel, press Setup.
2.
Use the arrow buttons to select Network config, and then press OK.
3.
Use the arrow buttons to select TCP/IP config, and then press OK.
4.
Use the arrow buttons to select Automatic, and then press OK.

It may take several minutes before the automatic IP address is ready for use.

HP Laserjet M2727 note Automatic configuration NOTE:

If you want to disable or enable specific automatic IP modes (such as BOOTP, DHCP, or AutoIP), these settings can be changed by using the embedded Web server or HP ToolboxFX only.

HP Laserjet M2727 Automatic configuration